camouflage face paint & Ghillie suits

Just another WordPress site

rainbow

Archive for the ‘Ghillie suits’ Category

APPENDIX: STATE NFA RESTRICTIONS


Streamlight

Taxpayer privacy
The transfer paperwork is nominally a tax return; the purpose of the registration, and the National Firearms Registration and Transfer Record (Registry) is keeping track of who owes the tax. ATF takes the position that taxpayer privacy laws apply to a transfer form, and that they may not discuss a pending transfer with anyone but the taxpayer, who is the transferor (seller), as he is responsible for the tax by law. This also serves to allow ATF to refuse to discuss why a transfer is taking so long with the party who is most interested in that question, the transferee (buyer). However, in another context (releasing information under the Freedom of Information Act) ATF has decided that as to a Form 4, the tax form is a joint return between the transferor and transferee, (see 1980 Auto Ordnance Corp. memo) so in that case the transferee should be entitled to the information about the application on the same basis as the transferor. That is not the usual practice, however. The NFA also prohibits the use of Registry information obtained from natural persons (only) for any law enforcement purpose except prosecutions for making a false statement on a transfer form (26 USC sec. 5848). Other tax laws prohibit the release of transfer information, as a tax return, except for certain narrow law enforcement type circumstances. See 26 USC sec. 6103.



GHOST 5 lb. tactical ar15 accessories Trigger Control Connector for Glocks

Awesome! This Trigger Control Connector is incredible! You asked for it and you got it, the GHOST tactical ar15 accessories now has the self-cleaning debris holes. Why is self cleaning so important? Because as you fire your pistol debris builds up on the trigger mechanism surfaces. These debris cause additional friction. This friction increases the weight of the trigger pull thus increasing the force applied to the connector. As the trigger pull weight increases the connector is pushed towards the rear of the trigger housing eventually far enough that the pistol will not fire! The channels also reduce the thickness of the connector body by 33%. This reduction increases reset speed and becuase these channels are located on the centerline of the connector body they do not cause connector torsioning. The GHOST tactical ar15 accessories is the first ever PATENTEDGlock Sights TRIGGER CONNECTOR specifically designed for SELF-DEFENSE, tactical ar15 accessories & SWAT APPLICATIONS. It works in allGlock Sights pistols. This Trigger Control Connector gives you a near 1911 style single action trigger pull, it is the shortest trigger pull possible for Glocks and at a great price. Add a wolff spring kit and you will get a sub 4.0 lb. trigger pull. For over 17 years I have been teaching people how to shoot their Glocks. The hardest thing for most people to learn was trigger control-not to flinch or jerk the trigger. Why? Because of the nature of theGlock Sights trigger it goes from mushy to hard to overtravel. Overtravel is the real killer here, because all this happens while the bullet is still in the barrel. Remove overtravel and you will remove all of this movement resulting in better groups faster, faster because the trigger does not move after firing and takes less distance to reset. The trigger is the heart of a pistol, a good trigger can mean the difference between wining or losing when your shooting for your life. LOSING IS UNACCEPTABLE, SECOND PLACE IS FIRST LOSER! The GHOST tactical ar15 accessories shortens trigger movement, eliminates overtravel & gives a faster reset. This enables you to shoot better & faster – ONLY HITS COUNT! Good hits are even better. The better the trigger the better the accuracy and faster you can shoot accurately. Requires minor fitting of the tactical ar15 accessories by shortening the Trigger Control Tab-no changes are made to the pistol. Please read the instructions on this website ROCKET, tactical ar15 accessories AND ALL OTHER CONNECTORS INSTALLATION INSTRUCTIONS . A Gunsmith or Armorer should install this connector. YOU MAY USE THIS CONNECTOR FOR ALL LAWFULL ACTIVITIES. No Risk 100% Satisfaction guaranteed or your money gladly refunded!

HOW GHOST TRIGGER CONTROL CONNECTORS WORKS

The ROCKET 3.5 & tactical ar15 accessories 5.0 are the Ghost Trigger Control Connectors they feature the Patented Trigger Control Tab (TCT) this tab is fitted to yourGlock Sights and shortens the over-all length of the trigger pull and eliminates accuracy robbing trigger over-travel. The TCT gives you a shorter faster trigger pull and keeps your shots on target. The ROCKET 3.5 or tactical ar15 accessories 5.0 are the only trigger parts you need to buy. You decide your trigger pull weight either 3.5 lb or 5.0 lb, either is suitable and legal for self-defense. The ROCKET KIT is definitely the preferred Trigger Control Connector set-up for sport shooters. There are no screws to come lose and jam your gun. You do not have to buy a trigger housing and a 3.5 lb or 5.0 lb connector to get a great custom trigger pull, just a ROCKET 3.5 or tactical ar15 accessories 5.0. These Trigger Control Connectors also have the Patent Pending Debris Channel(s) or holes. Why is self cleaning so important? Because as you fire your pistol debris builds up on the trigger mechanism surfaces. These debris cause additional friction. This friction increases the weight of the trigger pull thus increasing the force applied to the connector. As the trigger pull weight increases the connector is pushed towards the rear of the trigger housing eventually far enough that the pistol will not fire! The channels also reduce the thickness of the connector body by 33%. This reduction increases reset speed and becuase these channels are located on the centerline of the connector body they do not cause connector torsioning. The holes remove trigger choking debris from the trigger mechanism making sure yourGlock Sights keeps shooting no matter what you get it into. The Ghost Inc. Trigger Control Connectors and Trigger Connectors are the only ones that are self cleaning and make yourGlock Sights more reliable-why settle for less. All of our Trigger Control Connectors and Trigger Connectors are Factory Polished, polishing removes surface imperfections in the steel resulting in the smoothest possible contact surfaces ensuring a smooth consistent trigger pull every time, no other process including plating gives a better low friction or smoother interaction of the contact points for your trigger.

  • Only Ghost gives you the Patented TCT for a shorter, faster & lighter trigger pull
  • TCT eliminates over-travel
  • Only Ghost gives you the Patent Pending Debris Channel that keeps yourGlock Sights running when others choke
  • Factory Polished for the smoothest operation
  • Lifetime 100% satisfaction guarantee

Another good source of information is the ATF publication, “Federal Firearms Regulations Reference Guide” ATF P 5300.4 (10-95). It contains the GCA, NFA, and the regulations promulgated under those laws, as well as other useful information. Unlike the old “Red Book”, (this has a yellow cover), this one has the Crime Bill, and Brady law in it. It also has the Brady regulations, and the interim Crime Bill regulations. ATF also publishes a compilation of state laws, “State Laws and Published Ordinances-Firearms”, ATF P 5300.5 (10/94). Both are free from ATF. To get forms, or the books, you can write to ATF Distribution Center, PO Box 5950, Springfield, VA 22150-5950. Or phone them at (703) 455-7801. Or your local ATF office should be able to supply them also.

streamlight batteries
Californians can legally possess any AOW, except a pen gun, as long as it is possessed in compliance with federal law. Likewise they can possess any C&R listed short rifle or short …

Aimpoint Scopes
Any firearm whose possession is otherwise prohibited by subsection (a) is ok, under b(7), if the gun is a C&R one and lawfully possessed under federal law.

HARRIS BIPODS IDENTIFIER
To Use this Identifier to Select Your Bipod: Note: Bench Rest Items are marked with “*” in Harris Column 2.

Eotech, Aimpoint & Trijicon Red Dot Sights
il n n n n y ? n in y y y n y y n ks n n y n y y ? ky y y y y y y ? la y y y y y y y (mg’s …

infrared flashlights from Streamlight and Surefire
Just another WordPress weblog … An AOW is: – MSP: AR-15 Accessories, Scope Mounts & Rings, Rifle Scopes …

AR-15 Accessories for the Shooter
Enter a short paragraph of text or Adsense code, or disable the intro text entirely, in the theme options panel.

Gun accessories for you AR-15 and 10/22 » Blog Archive »
Harris Bipod . Versatile, sturdy, light and fast. Made from high strength anodized aluminum alloy. Stressed parts are tempered spring steel. Harris Bipods clamp to most Q.D. stud …

A DEWAT is an unserviceable gun that has an intact receiver, thus, as of the GCA of 1968, it is a machine gun. In 1955 the ATT decided that a gun that was a registered war souvenir (or for a time, a contraband unregistered gun) could be removed from the coverage of the NFA if it was rendered unserviceable by steel welding the breech closed, and steel welding the barrel to the frame. All this was to be done under the supervision of an ATT inspector. See Revenue Ruling 55-590. The gun became a wall hanger, ornament, like parts sets now. This was not the same as an unserviceable gun, which was still subject to the NFA, but exempt from the transfer tax. These steel welded guns were DEWAT’s. DEWAT stands for DEactivated WAr Trophy; it was regularly done for servicemen who wished to bring home NFA war souvenirs. It was also done to WWI and WWII era guns imported as surplus by companies like ARMEX International, and Interarmco, and then sold through the mail in ads in gun magazines. The glory days before 1968. A DEWAT must now be registered to be legal, there is no longer a legal difference between a DEWAT and an unserviceable weapon. A few states only allow individuals to own DEWAT machine guns, Iowa comes to mind.


SKS Accessories

If the gun is a sear conversion you may not alter the receiver to full auto configuration, in particular you may not install a push pin lower on your HK. You may alter a push pin lower shell to accommodate your clip-on trigger pack, so it looks authentic, but don’t alter the receiver. You may also alter one of the MG burst packs to fit on your semi-auto receiver, provided it is also modified internally so it no longer just uses the MG trigger pack with the original MG trip. Making an unaltered MG trigger pack fit the semi-auto is making a new conversion device; some registered HK conversion parts are MG trigger packs modified to fit right on the semi-auto receiver.

Kane County Deputy killed during foot pursuit – Williams Grand Canyon Tourguide
Scott Curley was reported to be armed with a high-powered AR15 military rifle. A temporary Felony Warrant has been issued for Curley for 1st degree murder. The shooting occurred approximately 3 miles east of Fredonia,

AR-15 Stocks
Nightforce Scopes Ballistic Program for Windows. YOU CAN SPEND DAYS AND DAYS AT THE RANGE OR A FEW MINUTES WITH OUR SOFTWARE. The tools to shoot more accurately.

There is also a revolver definition, but it does not add anything except a provision for guns with revolving cylinders, rather than permanent chambers.

NRA declines to endorse Reid – Nevada Appeal
WASHINGTON — Sen. Harry’s Reid’s support for President Barack Obama’s Supreme Court nominees has cost him the endorsement of the National Rifle Association in his re-election bid. The NRA is a force in rural …

No NRA Endorsement for Reid in Nevada Senate Race – Canada Free Press
Sen. Harry Reid’s support for President Obama’s Supreme Court nominees has cost him the endorsement of the National Rifle Association in his re-election bid. The NRA is a force in rural states like Nevada where many …

Tea Party Movement Tames the NRA – Associated Content
The National Rifle Association has learned a powerful lesson. That lesson is that they are not the all powerful group they thought they were whose members jump at their mere request. Whether or not they …

NRA mans up to Harry Reid – Washington Times
This week’s hostage standoff at the Discovery Channel headquarters in Maryland offers a scary reminder why it’s important for Americans to be able to own and carry firearms. When the public is packing heat …

2010 August archive | Camouflage Face Paint & Camouflage Wrap
There are several solutions to the law enforcement certification problem. They all require persistence, but less work than being a legitimate NFA dealer, in my opinion.

Form Title
——————————————————————
1 (5320.1 ) – Application to Make and Register a Firearm
2 (5320.2 ) – Notice of Firearms Manufactured or Imported
3 (5320.3 ) – Application for Tax-Exempt Transfer of Firearm and
Registration to Special (Occupational) Taxpayer
4 (5320.4 ) – Application for Tax Paid Transfer and Registration
of Firearm
5 (5320.5 ) – Application for Tax Exempt Transfer and
Registration of a Firearm
6 (5330.3A) – (Part I) Application and Permit for Importation of
Firearms, Ammunition and Implements of War
6 (5330.3B) – (Part II) Application and Permit for Importation

of Firearms [military]
6A (5330.3C) – Release and Receipt of Imported Firearms,
Ammunition and Implements of War
7 (5310.12) – Application for License
7CR (5310.16) – Application for License (Collector of Curios and
Relics)
8 (5310.11) – Federal Firearms License
9 (5320.9 ) – Application and Permit for Permanent Exportation of
Firearms
10 (5320.10) – Application for Registration of Firearms Acquired
by Certain Governmental Entities
3310.4 – Report of Multiple Sale or Other Disposition of
Pistols and Revolvers
4473 Pt. I – Firearms Transaction Record – Over the Count
er
(5300.9)
4473 Pt. II – Firearms Transaction Record – Non Over the Counter
(5300.9)
5300.34 – Questionnaire for Responsible Persons
5300.35 – Statement of Intent to Obtain a Handgun(s)
5300.36 – Notification of Intent to Apply for a Federal
Firearms License
5300.37 – Certification of Compliance with State and Local
Law
5320.20 – Application to Transport Interstate or to
Temporarily Export Certain National Firearms Act
(NFA) Firearms
5630.6A – Special Tax Stamp [for SOT]
5630.7 – Special Tax Registration and Return: National
Firearms Act (NFA)
————————————————————

ProMag™ 10/22® . 50-Round Drum Magazine : Cabela’s
50-round capacity drum magazine For sustained shooting fun Rugged polymer housing Stainless steel feed lips for years of service

Ruger | FHA Home Mortgage Loan Interest Rates
Rifle Scopes and Ruger 10/22 Accessories Give fuhdangmano a Gift ? MWG Companies offers Elcan SpecterDR ? 1x/4x red dot combat sight Tapco SKS ? bookshelf speakers for my fronts and …

AR-15 Sights :: http://www.fiberopticsights.com
Give fuhdangmano a Gift ? MWG Companies offers Elcan SpecterDR ? 1x/4x red dot combat sight Tapco SKS ? bookshelf speakers for my fronts and rears and have a Speaker Company …

Tapco AR15 30-Round Polymer Magazine : Cabela’s
Engineered for reliability in any environment 30-round capacity for AR-15 rifles … MWG 90 Rounder AR-15 Magazine

AR-15 Scopes
Give fuhdangmano a Gift ? MWG Companies offers Elcan SpecterDR ? 1x/4x red dot combat sight Tapco SKS ? bookshelf speakers for my fronts and rears and have a Speaker Company …

Ghillies suit with camouflage & Face Paint
fuhdangmano’s Page – Rap Bullet. Apr 17, 2010 … Ruger 10 22 … MWG – MUZZELITE Bullpup, Ruger 10/22. The most striking … Company Information.

Gun Magazines, Gun Clips & Factory Clips : Cabela’s
MWG 90 Rounder AR-15 Magazine $129.99: ProMag™ Pistol Magazine – Per 2 $44.99~$79.99: ProMag™ Pistol Magazines Select items on sale!

flashlights and glowsticks » Rifle Scopes
fuhdangmano’s Page – Rap Bullet. Apr 17, 2010 … Ruger 10 22 … MWG – MUZZELITE Bullpup, Ruger 10/22. The most striking … Company Information.

Blunt brings NRA officials to town for campaign event – Joplin Globe
JOPLIN, Mo. — Officials of the National Rifle Association campaigned Friday in Missouri on behalf of Roy Blunt’s run for the U.S. Senate. Wayne LaPierre, NRA executive vice president, and Chris Cox, the …

Cabela’s Roughneck™ Denim Flannel-Lined Jacket – Regular : Cabela’s
“Great Jacket, comes a little large but that was good, a little heaver than thought it would be but that is just fine. Good tough, durable jacket, I would recommend to anyone. MWG”

Special treatment of certain weapons
Destructive devices are treated differently, in terms of manufacturing or dealing. One must have a special FFL, (type 9, 10 or 11, to deal, make or import respectively) and be a SOT to make one tax free or deal in them. But anyone can make them on a Form 1, tax paid.

Trijicon RedDot Sight — 8.0 MOA: Mounting Solutions Plus (MSP)
Precision and Tactical : Trijicon RedDot Sight — 8.0 MOA from MSP – Mounting Solutions Plus Firearm Accessories and Shooters Supply. Products for shooters designed and tested by …

Trijicon RedDot Sights – Mounting Solutions Plus
Precision and Tactical Trijicon RedDot Sights: from MSP – Mounting Solutions Plus Firearm Accessories and Shooters Supply. Products for shooters designed and tested by shooters

Restaurant Owner Allegedly Points Handgun at Fired Employees – msnbc.com
A restaurant owner has been charged with allegedly pointing a handgun at employees while firing them. GRAND CHUTE – A restaurant owner has been charged with allegedly pointing a handgun at employees while firing them …

Trijicon ACOG 4×32 Scope with Yellow Center Illumination: Mounting …
Precision and Tactical : Trijicon ACOG 4×32 Scope with Yellow Center Illumination from MSP – Mounting Solutions Plus Firearm Accessories and Shooters Supply. Products for shooters …

Wis. Police Shoot, Kill Man at Traffic Stop – Officer.com
Sheboygan police are investigating … that the incident happened during a traffic stop at 17th Street and Michigan Avenue at 1:25 a.m. According to Chief Christopher Domagalski, the 52-year-old man would not comply …

Trijicon ACOG TA11F: 3.5×35 Illuminated Scope with Red Chevron …
Precision and Tactical Trijicon Acog: Trijicon ACOG TA11F: 3.5×35 Illuminated Scope with Red Chevron Reticle from MSP – Mounting Solutions Plus Firearm Accessories and Shooters …

Type Fee Description
—- —— ——————————————–
01 $ 200 – Dealer, Including Pawnbroker, in Firearms Other than
/$90 Destructive Devices
02 – No longer used, was a Pawnbroker dealing in Firearms
other than Destructive Devices, eliminated by the
Brady law (1994).
03 $ 30 – Collector of Curios and Relics
04 – ? Either 4 or 5 was a dealer in ammunition,
eliminated by FOPA in 1986.
05 – ? No longer used.
06 $ 30 – Manufacturer of Ammunition for Firearms Other than
Ammunition for Destructive Devices or Armor Piercing
Ammunition
07 $ 150 – Manufacturer of Firearms other than Destructive
Devices
08 $ 150 – Importer of Firearms other than Destructive Devices
or Ammunition for Firearms other than Destructive
Devices, or Ammunition other than Armor Piercing
Ammunition
09 $3000 – Dealer in Destructive Devices
10 $3000 – Manufacturer of Destructive Devices, Ammunition for
Destructive Devices or Armor Piercing Ammunition
11 $3000 – Importer of Destructive Devices, Ammunition for
Destructive Devices or Armor Piercing Ammunition
20 $???? – Manufacturer of High Explosives [unconfirmed; see
February 1995 issue of Machine Gun News]

Surefire LED Flashlights
Shooters Ridge Pivoting Adjustable Bi-Pod (13.5-23) These pivoting bi-pods are designed specifically for hunters who need a steady, portable and versatile rest out in the field.

Ruger 10/22 Stocks
Posted in: AR 15 Stocks | Comments (0) To re-activate the gun, ATF requires you file a fully completed Form 1 (ie you get the gun on a Form 5, including the law enforcement …

Surefire LED Flashlights
KEY MG – machine gun SI – sound suppressor (silencer) SR – short barreled rifle SG – short shotgun AOW – any other weapon LBDD – large bore destructive device

Harris Bipods & other Rifle Bipod
18 USC sec. 921(a)(24) “The term ‘firearm silencer’ or ‘firearm muffler’ means any device for silencing, muffling, or diminishing the report of a portable firearm …

Harris Bipods & other Rifle Bipod
SHORT BARRELED RIFLES – What are NFA Weapons? There are two kinds of firearms under U.S. (federal) law, title 1 firearms and title 2. Title 1 firearms are long guns (rifles and …

Ruger 10/22 Stocks
Posted in: AR 15 Stocks | Comments (0) To get Calif laws, pending bills and other stuff ftp to ftp.sen.ca.gov or ftp to leginfo.public.ca.gov, and l ook in /pub/code /pub/code …

www.riflestocks-plus.com

Surefire LED Flashlights
ATF takes the position that this includes any combination of parts fro m which a short barreled rifle can be assembled. And they said this included a set of parts with dual uses.

Eosteh Sights
As part of the new and revised 1968 National Firearms Act, there was one amnesty where folks could register any NFA weapons. It went from 11/02/68 to 12/01/68, although the …

Rifle Stocks for Ruger 10/22 & AR-15
NFA weapons are: machine guns, sound suppressors (a.k.a. silencers), short barreled shotguns, short barreled rifles, destructive devices and “any other weapons”.

Note that the silencer definition applies only to devices for firearms, i.e. powered by an “explosive”. An air gun silencer is not covered. But if it can be used on a firearm it would be. Thus an airgun silencer permanently attached to the airgun, or too flimsy to be used on a firearm, should be exempt. If you have an interest in pursuing this line of thought submit a sample or drawings to ATF Tech. Branch. I am not aware of any airgun silencer currently made, or determined to be exempt from this definition. But clearly there is room under the definition for such a gadget. Likewise, since antique guns, as defined in the GCA are not “firearms”, a silencer for such a gun is not, or should not be, covered. Perhaps one fitted permanently to a pre-1899 gun? The mind reels.


Eotech Sights

You are currently browsing the archives for the Ghillie suits category.